|
FEATURES:
- Construction: Balsa and plywood with double beveled control surfaces.
Jig built with laser cut parts.
- Wings: Two piece wood with aluminum wing joiner
- Covering: Factory applied premium polyester, color scheme is orange
- blue and white with chrome accents
- Radio Compartment: Plywood reinforced
- Cowling: Pre-painted fiberglass
- Wheel Pants: Pre-painted fiberglass
- Canopy: Single, tinted
- Fuel Tank: Approximately 20oz (720cc)
- Landing Gear: Main, pre-formed aluminum 0.14" (3.5mm) thick, 0.079"
- (2mm) diameter tailwheel wire
- Wheels: Two foam 2.5 " (63mm) diameter main wheels and one 1.25"
- (31mm) tailwheel
- Aileron Control: Dual servo
- Rudder Control: Pull-pull system
- Engine Mount: Composite, adjustable
- Building Time: Ready to fly in several hours
- Warranty Period: 90 day limited
INCLUDES:
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent main landing gear, tailwheel wire, two main wheels, one
tailwheel, engine mount, fuel tank, wood servo trays, aluminum
wing joiner, hardware package, photo-illustrated instructions.
braided cable, decal sheet and canopy
REQUIRES:
Engine:.60 -.90 cu in (9.8 - 14.7 cc) 2-stroke
OR .90 - 1.20 cu in (14.7 - 19.7 cc) 4-stroke
Muffler: Stock type supplied with engine, engine mounts inverted
Radio: 4-channel minimum
Servos: 6-Standard (2-Aileron, 2-Elevator, 1-Throttle, 1-Rudder)
12" (304mm) Servo Extension: Two for aileron servos
Y-Harness: One, for aileron servos
Spinner: 3" (76mm)
Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel
tubing, fuel filter, propeller, building and field equipment.
Technical Data:
Wingspan: 69.5in/1764mm
Wing Area: 56 sq dm
Flying Weight: 4300-4500g
Engine Size: 2c 0.90~1.08 4c ~1.20 (Not Included)
Radio: 4 channels (Not Included)
Servos: 6 standard servos (Not Included)
Picture:
|
